Three Practical Steps for Restoring Your Old Timber Table

Posted on: 10 July 2018

Timber tables are resilient and long-lasting. However, they will lose their appeal over time due to heavy usage. In simple terms, the surface of the table will experience wear due to the impact and load of crockery as well as accidental spills. Over time, the table will look old and dated, and it will not elevate your home's interior design. Fortunately, timber dining tables can be renewed through refinishing, and you can work on the table as a DIY project. Here are simple guidelines for restoring a worn out timber table for better aesthetics and improved performance.

Sand the Table

You should begin the restoration work by sanding the entire table. This process will ensure the removal of blemishes such as stains, spots and rough areas which compromise the appeal of the furniture. You should pay particular attention to the edges and the legs to ensure uniformity and eliminate the old finish completely. If you are inexperienced in woodworking, you should sand the surface by hand using sandpaper. However, you should note that you can use a belt or orbital sander to accelerate the process. You should remember to begin with rough grit paper and smooth out the wood grain using fine sandpaper. Once you are done, you should wipe off the dust using a tack cloth.

Stain the Surface

You should stain your sanded timber table to enhance the aesthetics of the wood. Staining darkens the grain and gives the wood a more prominent appearance in comparison to plain lumber. You should purchase an appropriate stain from your local store along with a paint brush. Apply the fluid liberally on the table surfaces and follow the grain for a smooth look. You should give the stain some time to soak in before wiping off the excess material. It is important to note that soaking the wood longer will darken the timber more. Therefore, the period of time should depend on the desired appearance. Also, you can use several coats of stain to enhance the richness of the stain.

Apply Polyurethane

You should sand the stained table lightly with fine-grit sandpaper after the coatings of stain dry. This process will remove the swollen fibres which might form due to stain absorption. If you are satisfied with the result, you can apply a polyurethane coat. This layer will protect the timber table against moisture, stains and accelerated wear. Also, it has a glossy appearance which will improve aesthetics. For the best results, you should use multiple coats and allow time for complete curing.

Share